Dental Crowns

Dental crowns are also called dental veneers among the public. Both applications serve the same purpose. There is no difference between them. It is used to eliminate the deterioration in the structure of the tooth and for a healthier tooth appearance. Dental crowns in sizes specific to the person’s mouth structure are prepared in laboratories. The appearance of natural teeth is achieved with these prosthetic teeth, which are then placed on the teeth.

Tooth structures wear or break over time depending on use. Traumatic accidents are common, especially in children and individuals who engage in dangerous sports. As a result of the breaks that occur, aesthetic appearance problems occur. Dental crowns come in handy at this stage.

Dental crowns are used to eliminate the appearance of broken teeth. A normal tooth structure is created by attaching it to the tooth surface. It is preferred not only for fractures, but also for areas where the tooth is completely missing. It is the main application especially for individuals who cannot apply implants.

In general, dental crowns; It helps to create aesthetic mouth and tooth structure. A healthy mouth and tooth structure is created as well as an aesthetic appearance. With short-term applications, it helps you feel good physically and psychologically on special occasions or in your daily life.

Before applying dental crowns, a dentist’s opinion is required, as in every application. A general examination of the patient’s dental structure is performed by the dentist. The areas to be crowned are determined. After the number for the dental crown is determined, measurements are taken.

The patient does not feel any pain during the measurement. Depending on the measurements, preparations are made in the laboratory environment. The patient is given a second appointment date to prepare dental crown materials. Preparations are made until this appointment. In the second session, the patient’s teeth are reduced in size. Prepared dental crowns are specially glued and fixed on the teeth.

It is one of the situations where patients experience the most anxiety during dental veneering. The feeling of pain is not a situation experienced during coating. Because only a simple process such as gluing is performed. Before the bonding process, the teeth are reduced. Local anesthesia can be applied to patients during the reduction procedure.

In order for dental crowns to be applied to the patient, the crowns must be prepared. It takes a few days for preparation. Therefore, dental coating is calculated on an average of two sessions. If crowns are to be applied to all teeth, two or three sessions are required. On the other hand, if a single tooth is to be veneered, it may take less time.

The duration varies depending on how many teeth will be treated in the dental veneer session. If all teeth are to be veneered, the time will exceed one hour. However, if only the front teeth are to be treated, 40-45 minutes is sufficient. The dentist’s experience and practice in this field may increase or decrease the time.

Dental crowns are prostheses that must remain fixed on the tooth. Special materials are used to ensure that it does not fall off the teeth and is easy to use. Adhesives are produced in a way that does not harm people’s health. When used on the tooth surface, it firmly fixes the coating.

UV rays are used for fixing. These rays enable the adhesive to solidify. Thanks to its solidifying feature, the hardening adhesive provides the targeted stability. With this bonding process achieved in a short time, the prostheses will be ready for use.

In order to get better results when veneering, natural teeth are reduced and cut. Thanks to the reduced area, better retention is achieved in the patient’s tooth structure. At the same time, methods such as zirconium coating provide a natural tooth appearance by allowing the tooth to receive light.

Nowadays, there are also methods where crowns are applied by dentists without reducing the size of the teeth. For porcelain veneer, application can be made without reducing the size. At the same time, if there is no tooth to be reduced, veneer may be preferred. A beautiful appearance is aimed by veneering the toothless area.

It is known that patients do research on the best quality dental crowns in order to get the best results. The person who must decide here is the patient. The dentist gives information about general dental crown materials. After receiving information about the advantages and disadvantages, the application begins with the patient’s decision.

There are zirconium coatings that adapt to the mouth and have the healthiest and most natural appearance. Among the zirconium dental crowns, it has the structure that best fits the gums. The ingredients it contains adapt to the structure of the mouth and do not cause gum recession or color change. On the contrary, it ensures trouble-free use for years.

Dental veneer prices may vary from clinic to clinic. Considering the general average, zirconium coating is the most expensive. However, you should know that fees may vary depending on the path the dentist follows. It would be better to get price information from the dentist in person.
However, it would be better for patients to choose a high-quality and healthy dental coating method rather than a cheap dental coating method. Because even though the price is high, the quality will increase accordingly, making this type of coating will be affordable in the long run.
Otherwise, the coatings you have purchased because they are cheap may break in a short time and may need to be repeated. You can feel comfortable by choosing clinics that offer affordable pricing and payment methods.

Zirconium coating is a method that provides the most natural appearance among dental crowns. It is often compared to porcelain veneers. Porcelain tooth coating generally provides a beautiful appearance. When compared in terms of price, it is possible to say that it is more affordable. Zirconium stands out due to its quality and adaptability, and it is more expensive in price.

Although dental crowns are produced with quality materials, there are rules that must be followed in order to be protected in the best way. Dental crowns can be affected by products with an adhesive structure. It is not recommended to use products that stick to an area and put pressure on it, such as chewing gum.

Patients use the gum again and again, trusting that their dental crowns are not damaged. However, it should be known that dental crowns that are not damaged in the first application continue to be more likely to be damaged later. Dental crowns may crack after each use, and their chances of breaking and falling increase.

Dental crowns become longer lasting with certain protection methods. Generally, dental hygiene is the primary prevention method. Dental veneers do not stain easily. However, staining will increase as long as you are treated carelessly after application.

Brushing should be continued as usual. You should proceed by making sure to brush twice a day. You should be careful about brushing the first day dental crowns are made. Since sensitivity may occur, it would be best to act gently without pressing.

It is very difficult to give clear information about the durability of temporary dental crowns. Since they are planned to be temporary, the materials used when making the crown will not be of very high quality. It is designed to be manageable and bonded to the teeth.

On average, their lifespan is limited to a few months. The reason is that it is intended to be used until switching to long-term crowns. Temporary crowns will be removed after the actual crowns are prepared. Since crowns cannot be removed and used, it is not aimed to increase their durability.

Would you like to have an aesthetic smile with dental crowns? If you want to have an aesthetic mouth structure and be healthier, you are at the right place. You can have a smile design done thanks to Mehmet Eker and other dentists in his clinic. You can achieve the look you are aiming for by having the dental veneer method of your choice in a short time.

Even though the materials used during the application are compatible with the structure of the mouth, they will feel strange in the first days. When dental crowns are glued on the first day, tingling may be observed. You should not worry about this situation, which is quite natural. You can reduce the pain by using painkillers if recommended.

If you are bothered by a feeling of tingling even though it has been months since you had dental crowns, there may be a problem. All you need to do is contact the dentist who makes dental crowns. After the necessary checks are completed, a problem, if any, will arise and actions will be taken to eliminate it.

When deemed necessary, dental crowns may need to be removed. If deemed appropriate by the dentist, removal is performed. If dental crowns are removed gently and without being damaged, they will be suitable for reuse.

Adhesives are removed from the removed tooth crowns and teeth. No adhesive remaining will ensure full contact with the tooth during re-adhesion. Otherwise, dental crowns remain high on the tooth. The cleaned tooth can then be re-glued and used.

Patients complain that dental crowns smell. Under normal conditions, dental veneers do not cause bad breath. The reason for the odor is due to incalculable negativities. If people suffer from bad breath, they should contact the dentist.

The reason for tooth odor is due to food accumulation on the tooth crowns or decay of the underlying tooth. If there is tooth decay, the dentist performs imaging and obtains information about this issue. Depending on the situation, the treatment process is calculated and progressed. Thus, bad breath will disappear.

Under normal conditions, dental crowns have a long-lasting use. However, it may still be necessary to renew it at the end of its useful life. The average lifespan of a dental veneer will vary between 5-15 years. Coatings that have expired, especially due to careless use, should be reapplied.

You can get general information about the renewal period during your check-up appointments with the dentist. As a result of this information, you can find the right time. The steps you need to follow and the rules for longer-term use will be explained to you in detail.

One of the possible situations is the decay of the tooth under the dental crowns. Decay is one of the factors predicted by dentists. Although caries is treated on the teeth before the dental crowns are glued to the teeth, uncontrollable caries may occur over time.

The possibility of encountering caries is very high, especially when porcelain dental crowns are used. Because in porcelain veneers, only the front surface of the tooth is coated. However, zirconium dental crowns are applied to the entire surface of the tooth. Covering the entire surface further reduces the possibility of caries formation.

When tooth decay occurs, dental crowns are gently separated from the tooth. The adhesives on the separated tooth crowns are cleaned. Decayed teeth are treated. Once the decay is cleaned, the dental crowns are glued back to the teeth if there is a suitable area. However, if the decay is advanced and the tooth cannot be saved, the tooth is extracted and dental crowns are applied to the empty area.

One of the applications that people can apply in case of tooth loss is implant treatment. In implant treatment, the screwing method is applied together with the system installed on the dental bones. The screwing method will ensure that the tooth remains in the tooth more firmly.

Although implants are a logical practice in case of missing teeth, they are not suitable for everyone. Implants cannot be placed, especially in young people and individuals with osteoporosis. In such cases, it would be more logical to have dental crowns.

If there is no problem with the dental bone and there is no osteoporosis, it is more logical to have an implant. However, if such situations exist or you have a hard time with a budget, it would be better to use dental crowns. The missing tooth will be filled to serve the same function.

Filling application is performed on decayed teeth. It is used to restore the natural appearance of the tooth after cleaning the rotten teeth. It has different materials such as amalgam filling and zirconium filling.

It is better to use fillings to eliminate small-scale caries or fractures in the back teeth, if sufficient. Thanks to the filling, the pain or ache in the tooth will be eliminated. However, if there are large-scale fractures or decay in the front teeth, it would be better to make a crown.

Thanks to dental crowns, a more aesthetic appearance is achieved on the front teeth. Thus, a natural tooth appearance will be achieved. It provides longer-term use compared to filler. It is also possible to say that it creates less cost in the long run thanks to its durable structure. However, you must be at least 18 years old to have a dental veneer.

Dental veneers are not always applied with long-term use in mind. In some cases, temporary crown application is used. Temporary crowns, as the name suggests, are for short-term use only. It is integrated into the mouth before moving on to the actual crowns that need to be used.
Since it is calculated as temporary, it does not have high durability. It has a fragile structure compared to actual crowns. Therefore, patients should be more careful if they will use temporary crowns. Otherwise, it may break easily and cause a bad appearance on the tooth. At this point, information will be given by the dentist.